Problem: How can I improve this Matterport dollhouse view?14902
Pages:
1
|
Alex77 private msg quote post Address this user | |
| Hi everybody, I have a big issue with my last project: I can't get a decent dollhouse view from this tour. What I dislike more is the outdoor area behind the entrance. We took 3 scans outside, but we turned them 'blind' except the one on the door (the starting point). More, we trimmed all that area OUT before uploading. What can I do in order to clean this dollhouse view up? Many thanks in advance! |
||
| Post 1 • IP flag post | ||
|
CharlesHH private msg quote post Address this user | |
| Classic problem when you go outside. I have similar issue with a job that I have just done. Try duplicating the model and deleting the other two unused outside scans and re-upload. It's free so you can experiment as much as you want. Before you upload set trim lines very tight so the scan is included but very little else. You will still get the view but the floor plan and dollhouse will be neater. If the client hates the dollhouse, you can always switch it off. |
||
| Post 2 • IP flag post | ||
|
Matt19 private msg quote post Address this user | |
| Hi Alex, I would probably duplicate the model and delete the three scans outside. Then if you don't already have trim lines at the garage door I would add trim their. Probably not ideal (since you wanted the outside scans)but pretty sure that will clean up the model. |
||
| Post 3 • IP flag post | ||
 WGAN3rd Party Service Member Beijing |
JuMP private msg quote post Address this user | |
| @Alex77 If you there are points in the cut off area, that cut line will be ignored. So you should duplicate one and delete all points in the cut off area and reupload for reprocessing. |
||
| Post 4 • IP flag post | ||
|
denlee private msg quote post Address this user | |
| I'll still use Matterport if someone specifically wants it, but mostly I've switched to Asteroom partly because of the vastly superior dollhouse which includes the outside. In this example of a commercial property, the dollhouse (or 3D model as I prefer to call it) shows the entire property: clickable text |
||
| Post 5 • IP flag post | ||
|
|
Alex77 private msg quote post Address this user | |
| Hi, thank you all for the precious suggestions! I will try to delete the outdoor scans. | ||
| Post 6 • IP flag post | ||
|
|
Alex77 private msg quote post Address this user | |
| Hi all again, your suggestions solved my main problem with this dollhouse. I noticed something very strange: from a big window the inner garden seems duplicated! How's possible this problem? I think it can't be solved...  Moreover, is there a way(for this tour, or for the next ones...) to improve how the ceilings are displayed in the dollhouse view? Thanks again in advance!  |
||
| Post 7 • IP flag post | ||
|
WGAN 3rd Party Service Member Beijing |
JuMP private msg quote post Address this user | |
| Maybe you can try to add two "windows" mark back to back at the "red arrow" area, one inside and one outside of the glass. Reupload and reprocess to see if there is any imporvement. It will make the windows mark area to be a full double sides surface. Same thing can be try at the "yellow arrow" area. About the fragments on the roof, currently no way to solve it except the Matterport guy can modify the mesh file for you manually.  |
||
| Post 8 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?