Urgent: PLEASE HELP! On site...Matterport capture app crashing7425
Pages:
1
|
AlexTC54 private msg quote post Address this user | |
| Currently on site capturing a space with Matterport MC250. Next scan should be #489. I click capture, and the camera operates as normal. Once it's done capturing, it begins to align. The screen then flashes maybe 3 or 4 times, and the app closes. We have a second camera, so we tried switching that. Also tried restarting the iPad. The ipad is only at 5% memory, so that is also not an issue. What could this possibly be? Bad app? If I update the app, will I lose all 488 scans? That has taken two overnighters to accomplish. Any suggestions would be greatly appreciated!! |
||
| Post 1 • IP flag post | ||
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @AlexTC54 Emergency Check List https://www.wegetaroundnetwork.com/topic/4713/page/1/emergency-check-list-matterport-capture-app/ Dan |
||
| Post 2 • IP flag post | ||
 WGAN StandardMember Birmingham, Alabama |
rko1 private msg quote post Address this user | |
| We had the same problem, took the same course of actions. What we found was for lack of a better term, a corrupted scan. We went back to the last known good scan and rescanned one next to it then we finally got past the problem. This was about 4 months ago, and in fact this same problem has been reported before, and seems to be a known issue. Hopefully this helps. | ||
| Post 5 • IP flag post | ||
|
|
AlexTC54 private msg quote post Address this user | |
| Thanks Dan! We duplicated the project, and will try our best to find the corrupted scan! | ||
| Post 6 • IP flag post | ||
|
|
AlexTC54 private msg quote post Address this user | |
Quote:Originally Posted by rko1 How did you know that you 100% found the corrupted scan? Occasionally we were able to get a scan or two in, so I am afraid that I may get a couple in, thinking it's fixed, and get much further down the line. Any suggestions on how could I potentially avoid this? |
||
| Post 7 • IP flag post | ||
|
WGAN Standard Member Birmingham, Alabama |
rko1 private msg quote post Address this user | |
| We didn't know, we just knew that at one point no matter which direction we tried from that point it rebooted the system and we were dead in the water. So we tried everything, all the resets, etc. We spoke with Matterport and others and nothing seemed to work. So we thought that it must be some corruption, just logical. So we rescanned several points back until we were able to move forward, and it fell into place and have not had that issue again. We also duplicated the project, then every 25 scans we duplicated the project. We are up to almost 1200 scans and it has only happened the one time, but once is enough. Let me know how it goes..Good luck. | ||
| Post 8 • IP flag post | ||
Buffalo, NY |
iTours360VR private msg quote post Address this user | |
| @AlexTC54 Had a similar issue last week that was deduced to be a bad scan that kept closing the capture app. Matterport Support advised me to reshoot the problem area with some overlapping scans as a new project. They were then able to stitch the two projects together. |
||
| Post 9 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?