Matterport Model Trimming Issue6942
Pages:
1
|
Networker private msg quote post Address this user | |
| Hello All! I thought I might be able to get this issue handled faster right here on the World's best MSP forum. (I know shameless brown-nosing). Here's the issue. I have a client who likes the model but, they want me to cut off the outside hall (Scan 6). The model is still on the iPad and I have put the "remove" line (as you can see) across the entrance. I have uploaded the model three times and it still has the offending hallway attached to the Dollhouse. What am I missing? Any suggestions? Thanks in advance.  |
||
| Post 1 • IP flag post | ||
|
DouglasMeyers private msg quote post Address this user | |
| You will have to go back to your capture screen and delete the 6 scan (you will loose the information) so just in case copy it then delete number 6 and maybe the other one and reupload that. Good luck |
||
| Post 2 • IP flag post | ||
|
HarlanHambright private msg quote post Address this user | |
| Trim deletes 3D data, not photo data. If you can see Scan 6 photo from scan 8, through glass or the like, it will still be there after deleting scan 6. The dollhouse would be clean though. Whee. | ||
| Post 3 • IP flag post | ||
|
|
Networker private msg quote post Address this user | |
@DouglasMeyers, @HarlanHambright Thank you, gentlemen, for your excellent advice. I remove both #6 & #8 scans and Voila! a perfect Dollhouse. You just save me $19 and I owe you both a drink! Thanks again!  |
||
| Post 4 • IP flag post | ||
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
Quote:Originally Posted by @Networker On bahalf of WGAN Forum Members in 109 countries, thank you for your kind note. Dan |
||
| Post 5 • IP flag post | ||
|
|
Networker private msg quote post Address this user | |
| @DanSmigrod You know what I think Dan. We've spoken before. I think I misspoke when I said "the World's Best MSP Forum" The WGAN forum was a stroke of genius that started out as a Matterport forum and has morphed into something much, much better. Kudos to you. I am sure my feelings are echoed in 109 countries. | ||
| Post 6 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @Networker That's super-kind (and much appreciated). While we started out as the Matterport User Group Forum (MUG) in August 2014, we quickly realized that while we are Matterport centric, Matterport Service Providers - and those researching Matterport - were (and continue to be) interested in Matterport competitors to either: ✓ make a decision to buy Matterport faster ✓ make a decision to buy a different camera and/or platform ✓ know the competition While we always covered other Cameras, platforms and service providers, we formalized it by changing the MUG name to the We Get Around Network Forum on 1 September 2016 to be inclusive of all 360º-3D-VR Cameras, platforms and Services with a real estate centric focus. Best, Dan |
||
| Post 7 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?