Doors that must be opened/closed611
Pages:
1
 WGAN BasicMember Denver |
pixelray private msg quote post Address this user | |
| I do apartments and I always have trouble with alignment when I go in tight spaces that requires a door to be in a different position (open/closed) from a previous scan. I also have to showcase washer/dryer spaces which a lot of times require me to open door again after a precious scan with same door closed. Any tips? | ||
| Post 1 • IP flag post | ||
|
Jamie private msg quote post Address this user | |
| Scan on both sides of the closed door so you have that data, then come back and open the door and rescan from a distance and work your way to the open door. You can then disable the unwanted scans in workshop |
||
| Post 2 • IP flag post | ||
|
smcclell private msg quote post Address this user | |
| Does the data in disabled scans still stay at all in the end model? | ||
| Post 3 • IP flag post | ||
|
|
Jamie private msg quote post Address this user | |
| For 2d and doll house, yes. For the walk through, only the enabled scans will be visible It also a good way of getting rid of the black areas. You can do this to scan inside of closets, to see the dollhouse data but not actually look into it |
||
| Post 4 • IP flag post | ||
|
|
smcclell private msg quote post Address this user | |
| Great, cheers. | ||
| Post 5 • IP flag post | ||
|
WGAN Basic Member Denver |
pixelray private msg quote post Address this user | |
| awesome. thanks Jamie. This has been driving me crazy. | ||
| Post 6 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?