Problem with doors in a corridor.2097
Pages:
1
|
michelg private msg quote post Address this user | |
| Hello I have a problem with the doors of the adjacent rooms of an entrance hallway of an apartment that open the side of the corridor. If I start to scan at the beginning of the corridor with the doors open, the result is not beautiful. And if I scan the doors closed and if I come back in after opening the doors to get into the rooms, I have on alignment problems. I'm sorry for my bad english so may be a virtual tour matterport show you better, Yes of course ! https://my.matterport.com/show/?m=9PvXZEc9RvD&brand=0 Thank you for your solutions Michel |
||
| Post 1 • IP flag post | ||
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @michelg For clarification, can you post screen grabs exactly where you see the challenge? Opening and closing doors during shoots is difficult to get the desired result of the apartment looking nice without the doors open and then entering a room with the doors open. Our technique to accomplish this is hard to explain, but I will give it a try. 1. Scan with the doors closed 2. Then, open the doors 3. Then, go to a space in the apartment where you can not see that a door has opened 4. Scan the same path going into the rooms that the doors are now open 5. Once done, duplicate the model on your iPad (in case the following does not work) 6. Using the duplicate model, delete the scans you no longer want (probably the path with the doors open in Step 4 (Except for the scans you want to walk in the rooms) Note: the hardest part is scanning in front of the door open and in front of the door closed. The door closed scan needs to be between the open door scan needs to be between the open door and the closed door scan. Clear as mud? Please let us know how this process works for you. Dan |
||
| Post 2 • IP flag post | ||
|
|
michelg private msg quote post Address this user | |
| Dan thank you for your answer.  I wanted to start a scanner at the entrance of the apartment but I could not because the door of the bathroom to the right opens into the hallway and as for another room that is normally at the left but I did not success to scan it. I disable scans but I restore them to understand. https://my.matterport.com/show/?m=9PvXZEc9RvD&brand=0 How would you have do in this situation ? I have to do as you write above? Thanks again Michel |
||
| Post 3 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @michelg I believe I understand the challenge. If you were to open the door completing, you could not get by. If that is the case, can you partially open the door? For example, enough to scan forward into the apartment and scan into to the room - without opening and closing doors. Okay? Dan |
||
| Post 4 • IP flag post | ||
|
|
michelg private msg quote post Address this user | |
| @Dansmigrod Yes indeed it is I have done with the bathroom on the right, but not the small room to the left. But I think the best is to think that seeing a corridor that is not very interesting finally! That 's okay dan, I thank you Michel |
||
| Post 5 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @michelg Great! Please share the final result so that we can compare the two. Thanks, Dan |
||
| Post 6 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @michelg If you have access to the space, you might try the process I outlined above (about how to scan with doors opening and closing) and share that model too. Matterport does not charge for reprocessing the same model with changes. Dan |
||
| Post 7 • IP flag post | ||
|
|
michelg private msg quote post Address this user | |
| @DanSmigrod Yes I will try to access again to the space Have a good day Michel |
||
| Post 8 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?