How to use a 'Matterport Sandwich' (and How to Avoid Having to Use it)10100
Pages:
1
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| WGAN-TV Training U - Matterport Capture App and Matterport 3D Showcase App - Short Story #950- Capture App Matterport Sandwich (From WGAN-TV Training U Course: Matterport Capture App and Matterport 3D Showcase App --- How to use a 'Matterport Sandwich' (and How to Avoid Having to Use it) Hi All, In the WGAN-TV Training U video (above) from the Course Matterport Capture App and Matterport 3D Showcase App, you learn about what is a Matterport Sandwich; how to do it (and how to avoid having to do it). This WGAN-TV Training U Course also covers why-when-how to mark mirrors and windows; how to create floors in the Matterport Capture App. Plus, what is a 360º View and how to move and place in the Matterport Capture App. In the same Course, you will learn how you – and your clients – can add and view your Matterport 3D Tour in the Matterport Showcase app – offline. (Tip: Matterport 3D Showcase App is great for Client demos and trade shows where Wi-Fi may not be an option.) The Matterport Capture App and Matterport 3D Showcase App course it taught by Matterport Content Marketing Manager Amir Frank. Double-Your-Money-Back-Guarantee: Complete one of 25+ WGAN-TV Training U (in Matterport) courses within the first 30 days and if you are not succeeding faster in Matterport scanning, Workshop 3.0 – or other course completed – we will refund double your first month tuition. Best, Dan P.S. WGAN Training, Basic, Standard and Premium Membership includes free WGAN-TV Training U (in Matterport) Membership. Already a Member? Please Private Message me for a Coupon Code for free WGAN-TV Training U Membership. |
||
| Post 1 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| Hi All, During today's (21 November 2019) Matterport Support Live, Marcus discussed using the "Matterport Sandwich" ... Here's the transcript from this portion of the call .. "... say you're scanning down a hallway and there's a door at the end of the hallway and you're making your way down. And as you're going down the hallway, you're scanning each room as you go. Say all of the other rooms adjacent to this hallway, to the left and to your right, the doors are wide open and you're scanning them as you progress down the hall. On the other end of the hall is a closed door and when you reach that door, you open it, scan the threshold, scan the room, and then continue on with the rest of your space. Well, the issue when processing that space is that door that remained closed through that entire scanning of the hallway and throughout the rest of that cadence up to that point, the door was closed, and then opened, and then scanned. If you were to process that, the closed door combines with the open door, in terms of the 3D mesh that's there. And it's a gigantic roll of the dice whether or not you may or may not be able to pass through that threshold of that door, due to the door being closed initially for so much of the approach to that particular door. So it's very, very important to open all doors that you plan to navigate through and leave them open prior to scanning, otherwise you may unintentionally block yourself from accessing certain rooms and certain areas. Now, there, if you do run into this problem, and you do have that error, and you keep slamming against this fake wall that's there, you may be able to see the issue that's there if you were to access your workshop POV and click on the mesh button in your workshop edit info. But there is a trick ["Matterport Sandwich"] that you can do also to alleviate it, if you happen to be stuck. And that's accomplished by placing two trim markings on either side of the door frame itself, with the arrows pointing inward at the mesh you've accidentally created. So if you were to get a model back that has that blockage in a door, in an accident, you know, it's common to be under pressure for time when you're in a space, and you may have accidentally forgotten to leave a door open or have a door stop with you or two, and you may have three, you know, three places to scan in a single day, you're in a rush. It's easy, sometimes it's very easy to forget. So if that happens to you when you get a space back, go back in your Capture app, place the two trim markings appropriately on either side of the door frame. What that will do, it will kill the mesh that's trapped in between the two trim markings. And then, re-upload the space and it should very well eliminate that mesh that's there. I hope all of that makes sense. We do have an article published about doors and doorways in general, but more often than not, it's such a common issue for first timers to run into because it's simply not thought of. But we do run into it a lot, customers run into it a lot, and hopefully those tips do help you in the future." |
||
| Post 2 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| Hi All, Have you used a "Matterport Sandwich" to fix the walk-through experience? Best, Dan |
||
| Post 3 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| Video: FIXED, Not Able to Go Put an Open Door #matterport| Video Courtesy of AgentCaseyG YouTube Channel | 25 March 2024 | ||
| Post 4 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?