WGAN-TV Live at 5: GeoCV FAQs with GeoCV Co-Founder and CEO Anton Yakubenko8749
Pages:
1
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
GeoCV Virtual Open House™ example courtesy of GeoCV. WGAN-TV Live at 5: GeoCV FAQs with GeoCV Co-Founder and CEO Anton Yakubenko Hi All, Got a GeoCV question? Ask it - live - on WGAN-TV Live at 5 (5 pm EST | GMT -5) Thursday, 28 February 2019 when my guest will be GeoCV Co-Founder and CEO Anton Yakubenko. Our topic: GeoCV FAQs. Best, Dan WGAN Forum Discussions Tagged: GeoCV WGAN-TV - Matterport versus GeoCV with GeoCV CEO and Co-Founder Anton Yakubenko, PhD [January 2018] |
||
| Post 1 • IP flag post | ||
 WGANStandard Member Los Angeles |
Home3D private msg quote post Address this user | |
| Don’t miss this event. GeoCV is pushing the envelope which benefits the entire industry. Impressive innovations from a team of people who are also open and receptive communicators. | ||
| Post 2 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @Home3D Can you join the show and ask Anton questions? Best, Dan |
||
| Post 3 • IP flag post | ||
|
WGAN Standard Member Los Angeles |
Home3D private msg quote post Address this user | |
| It’s on my calendar. Only wild card is if a booking interferes. | ||
| Post 4 • IP flag post | ||
|
TrustedPhotoDC private msg quote post Address this user | |
| 1) what’s Anton’s legal status working in the US? Is he a citizen? visa holder? Green Card? 2) If geoCV were to receive an injunction to stop publishing, how would publishers be compensated for loss of business? 3) Patent lawsuits can be long and expensive. Who and how is geoCV funding their defense? |
||
| Post 5 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @TrustedPhotoDC Can you join the show and ask Anton these questions? Dan |
||
| Post 6 • IP flag post | ||
|
Kumar private msg quote post Address this user | |
| Just in case I miss to join.. 1. Possibility of constructing the tour with RAW data (images + cloud points) from BLK360 For cases where we opt to work with other services for time being and wish to move to GeoCV when available. |
||
| Post 7 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @Kumar Hope you can make it to ask your questions directly. Hi All, Please join the show to ask Anton your questions directly. Best, Dan |
||
| Post 8 • IP flag post | ||
|
|
Kumar private msg quote post Address this user | |
| @Dan Any possibility of sending event calendar for all events so one can add and be reminded? If the forum platform doesn’t have any such feature you may consider external links? Thanks Kumar |
||
| Post 9 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @Kumar If you join the WGAN-TV YouTube Channel, you will automatically get reminded when we go live (activate the bell for notifications). Best, Dan |
||
| Post 10 • IP flag post | ||
|
|
Kumar private msg quote post Address this user | |
| @DanSmigrod - that was easy. Thanks | ||
| Post 11 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
 Hi All, Reminder that you can ask GeoCV Co-Founder and CEO Anton Yakubenko your questions live during the show Thursday (5 pm EST (GMT -5) 28 February 2019. Best, Dan |
||
| Post 12 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| Hi All, Got a GeoCV question to ask @AntonYakubenko ...? Ask it live on WGAN-TV Live at 5 on Thursday, 28 February 2019. Best, Dan |
||
| Post 13 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| Hi All, If you would like to be reminded when we go live today (Thursday, 28 February 2019) with WGAN-TV Live at 5 with GeoCV Co-Founder and CEO @AntonYakubenko ... Subscribe to the WGAN-TV YouTube Channel and enable the bell for notifications. Plus, when we're live, you can join the program to ask Anton your questions directly using this link or click on the red bar in the bottom-right popup.  screen grab from the WGAN-TV Live at 5 Popup (bottom-right of WGAN Forum. Best, Dan |
||
| Post 14 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| WGAN-TV Live at 5: GeoCV FAQs with GeoCV Co-Founder and CEO Anton Yakubenko Hi All, GeoCV Co-Founder and CEO @AntonYakubenko packed in a ton of info in this show. Special Thanks to Sunningdale, Ascot, Berkshire, UK-based (Responsive Reality) @leonvanzweel and Los Angeles-based (Home3D.us) @Home3D Kevin Dole for asking questions (and for Kevin giving us a sneak peak at his GeoCV scanning experience (Kevin is the first WGAN Member to borrow a GeoCV Kit from the WGAN 360º Camera Loaner Program.) Best, Dan P.S. Got follow-up questions for Anton? Please post here ... |
||
| Post 15 • IP flag post | ||
|
craige private msg quote post Address this user | |
| I missed the Live at Five broadcast, however I will be sure to watch that episode this weekend. After just a cursory glance.. and without knowing pricing, it certainly is interesting and immediately has me wonder whether that platform would have been a better choice to start off with. [edited to add:] (I suppose I could still exercise that choice, just jump into a different rabbit hole. My business model would not change, and I would just become familiar with a different toolset.) That ship has sailed, and I certainly am happy with the results I've achieved for my first client engagement using Matterport and WP3D. More importantly, so is my client. Maybe this will be a nice addition to my kit in the future, hopefully offering enough unique difference to warrant both. If nothing else, it will motivate Matterport to stay sharp. Curiosity piqued. -craige |
||
| Post 16 • IP flag post | ||
|
|
Kumar private msg quote post Address this user | |
| I missed on the show due to timing (rather being lazy to wake up early). I did go through the session in full and I got thinking on two factors. Power: Quick swap of the tube cells for the rotor is great and no worries as one could get carry as many. For the phone it is little concerning for venues where one has limited access (hotels and corporates especially) and we end up wasting time for many reasons in almost all cases. I am sure Anton and team are checking/ed on the following, 1. Battery case for the camera 1.1 This adds extra weight no doubt - few available range about 100 to 120 gms and can double the life. 1.2 The advantage here is not just extending the life but being able to quick swap 1.3 The overall run time of rotor will reduce but it is still easy to take care with battery change 2. To avoid extra weight on the phone assembly rotor but add to the base rotor with the help of external battery attached. 2.1 We need a USB C adapter - which will care for charge to phone and data to IR unit 3. Possibility designing a power system which can be rested on the tripod - this will be ultimate choice as it reduces the load on rotor and extends the life too. 3.1 Pretty much uncalled for at this point in time Remote control: One might think of this as silly but I always find it handy and quick to work in team of 2 for capturing. One to take care of the camera operation + aesthetics of the place etc.. and other that of camera placement + people management etc..... Window/mirror marking - you did mention of update with snap on feature to ease this. |
||
| Post 17 • IP flag post | ||
Lugano, Switzerland |
lucadeal private msg quote post Address this user | |
| Hello there! Awesome video interview, thanks so much Dan! And KUDOS to Anton and GeoCV for what they're providing, truly amazing! Just 2 questions: - Many of my clients are asking for a way to have a kind of a preview of the actual virtual tour (maybe allowing the random viewer to see the whole dollhouse and just 3 or 4 spots) and then if the viewer wants to see the whole 3D tour, he just needs to provide an email address and then he'll be allowed to visit the whole space. It's basically a way to get leads / potential buyers while somehow protecting the property by knowing who's actually visiting it. Is this something possible with GeoCV? - Is it possible to create a "guided virtual tour" with a PLAY button? 'cause I couldn't find any example of that... also, if that's doable, is there a way to loop it? It's something that some clients are asking me, as an automatic solution to put on large screens within their offices and fair booths. Thanks! Luca |
||
| Post 18 • IP flag post | ||
 GeoCVCo-Founder New York City |
AntonYakubenko private msg quote post Address this user | |
Quote:Originally Posted by Kumar The bottleneck in power is charging smartphone during shooting. We've done a ton of experiments on that. I doubt we gonna change with this particular smartphone (there are limitations not visible on the surface), but there might be some solutions in the future with different phones. |
||
| Post 19 • IP flag post | ||
|
GeoCV Co-Founder New York City |
AntonYakubenko private msg quote post Address this user | |
Quote:Originally Posted by lucadeal Thank you! Quote: Originally Posted by lucadeal Not yet, but we had this idea. Would you suggest to ask for email to continue browsing after certain time, or certain number of spots, or any other trigger? Quote: Originally Posted by lucadeal We don't have Play button, but you can manually go through Highlights. Example: https://geocv.com/416e11th |
||
| Post 20 • IP flag post | ||
|
|
Kumar private msg quote post Address this user | |
Quote:Originally Posted by AntonYakubenko Workable option is to have two of S8 - works well for a job of 5 hours target. Then merge the models in post. For larger scope, you can think of transferring the capture data from one to another phone (may be 10 minutes job with a PC) then continue capturing to make sure alignment is taken care while capturing. If you think one can bet on post processing 2 phone configuration should suffice. With help from support team one can stitch different sessions — of course with couple of common points in all of them. |
||
| Post 21 • IP flag post | ||
|
GeoCV Co-Founder New York City |
AntonYakubenko private msg quote post Address this user | |
Quote:Originally Posted by Kumar Yeah, it's a good idea, we've considered it. Somewhat cumbersome in implementation, would prefer a more elegant solution. But we keep this option in mind. |
||
| Post 22 • IP flag post | ||
|
Lugano, Switzerland |
lucadeal private msg quote post Address this user | |
@AntonYakubenko (don't know how to quote )"Not yet, but we had this idea. Would you suggest to ask for email to continue browsing after certain time, or certain number of spots, or any other trigger?" Here's an example of how I'd love to be handled: https://3d.immoleague.ch/tour/2094199/ it's basically after a few spots, then you'll have to fill in a pop-up window to keep on visiting. There's an English flag at the bottom-left corner Please let me know if that's doable, it would be a game-changer option in this part of the world where privacy is a major concern THANKS! Luca |
||
| Post 23 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?