Matterport Pro 2 lighting issues8089
Pages:
1
 WGANStandard Member Chicago |
rzphotoman private msg quote post Address this user | |
| For the last month or so I have been noticing what appears to be a processing issue with the Pro 2 that causes some really strange lighting effects along with everything being slightly lighter. I just finished scanning a Memory Care / Assisted Living Center. The problems I ran into throughout the scan were blown out lights, strange color banding on ceiling lights, lens flare and more. Along with scanning the entire complex, they had me scan some of the separate amenities they offer, like their Salon. Check out all the problems with this scan. So many issues I had to go back and re-do it...which turned out great because it was not as bright out the second time. Also, check out the strange color banding on the overhead lights in this photo.  I scanned a portion of this building a month ago for a different project with no lighting issues, that's what makes me think Matterport has changed something in the processing. I'm also getting a number of mis-placed scans lately...like the scan will show up in a different room in the building. Has anyone else been running into these problems lately? |
||
| Post 1 • IP flag post | ||
Regina, Saskatchewan Canada |
Queen_City_3D private msg quote post Address this user | |
| I've noticed it too. I think I had read a Facebook post a week or so ago that someone had raised the issue with Matterport support and they were told that something in the processing was tweaked so that there was more clarity looking out through windows (i.e., seeing the outside view from inside), and that has had the effect of over-brightening the inside lights. I tried to find that post, but couldn't locate it. I don't remember what group page it was on. |
||
| Post 2 • IP flag post | ||
|
BrianAshley private msg quote post Address this user | |
| I just had the issue of different placement for the first time today and it was 'weird' two bedroom apartment and two of the scans from bedroom one dropped right into bedroom two. | ||
| Post 3 • IP flag post | ||
Sarnia, Canada |
June private msg quote post Address this user | |
| I had similar issues, although with the Pro not Pro2. I contacted Dee and she said it is an issue they are looking into (software) and would forward my information to the engineering team. I would suggest you contact support because the more people that do that, then it might get cleared up sooner. | ||
| Post 4 • IP flag post | ||
|
WGAN Standard Member Chicago |
rzphotoman private msg quote post Address this user | |
| Thanks @June...I did submit it to support but haven't heard anything yet. I usually get better and faster answers from the great people on this forum. | ||
| Post 5 • IP flag post | ||
|
Sarnia, Canada |
June private msg quote post Address this user | |
 |
||
| Post 6 • IP flag post | ||
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @rzphotoman A related WGAN Forum Discussion: ✓ Matterport Windows and Lights Seem Worse. For you too? Dan |
||
| Post 7 • IP flag post | ||
|
Sarnia, Canada |
June private msg quote post Address this user | |
| Thanks! | ||
| Post 8 • IP flag post | ||
|
WGAN Standard Member Chicago |
rzphotoman private msg quote post Address this user | |
| Hi all, Here is the response I just got from Bob at Matterport support: Matterport-Bob (Matterport Support) Oct 24, 5:21 PM PDT Hello, Thanks for the detailed inquiry! I got good news for you, engineering has been working to address two sources of the issues you are reporting with this space. The first of these, which was designed to address the blown out lights, was released to production late yesterday, (after this space completed processing). The second, which was created to address the banding/artifacts, is currently undergoing testing with the goal of getting into production before weeks end. Regards, Bob Note: I re-uploaded this bad scan to see if the issues he talked about have been corrected. I will post it when I get it back. |
||
| Post 9 • IP flag post | ||
|
WGAN Standard Member Chicago |
rzphotoman private msg quote post Address this user | |
| Update...just got the scan back after re-processing and it looks the same. | ||
| Post 10 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?