Matterport Skewed 360s6145
Pages:
1
|
OpenHouseOptics private msg quote post Address this user | |
| So this is a first, all of the images that I pulled from the Matterport tour scan points are all squared but the images I pulled from the 360s I did are out of square. Is anyone else experiencing this new phenomena? | ||
| Post 1 • IP flag post | ||
|
HarlanHambright private msg quote post Address this user | |
| you need to provide an example. | ||
| Post 2 • IP flag post | ||
|
|
OpenHouseOptics private msg quote post Address this user | |
Sorry, I thought I had. Usually, I can align my verticals and I had no issues doing so for any of the images taken from scan points...but when I went to take images from the 360s they were all off. Like if I align the right vertical then the left was completely off...almost curved.   |
||
| Post 3 • IP flag post | ||
|
|
HarlanHambright private msg quote post Address this user | |
no clue. it it's any consolation, you can fix it with PTtools  |
||
| Post 4 • IP flag post | ||
|
TrustedPhotoDC private msg quote post Address this user | |
| If your camera is not level, neither will the verticals in the equirectangular projection image that you download. The image can be fixed in PTGui. | ||
| Post 6 • IP flag post | ||
|
|
OpenHouseOptics private msg quote post Address this user | |
| Camera was level - but it doesn’t make sense that it only happened on the 360 mode and not in scan mode...does it? I’m befuddled. I’ll look at PT. | ||
| Post 7 • IP flag post | ||
|
BrianAshley private msg quote post Address this user | |
| Did you shoot the 360's 'after' the 3d scans as recommended by MP? If so, is it possible your camera connection to base plate was just loose enough to cause this at that point in the project, but not yet loose enough to give you the error message? Just thinking out loud here....best wishes |
||
| Post 8 • IP flag post | ||
|
|
OpenHouseOptics private msg quote post Address this user | |
| Hmmm I definitely mixed them in. It’s just weird that everything is good and on my 126th Scan everything goes awry. I did the speed beta - could that be causing the issue? |
||
| Post 9 • IP flag post | ||
Frisco, Texas |
Metroplex360 private msg quote post Address this user | |
| @OpenHouseOptics Could be the FastCapture beta -- but I think that getting to 126 scans, with many being poorly levelled, is likely the reason that alignment fell off the tracks. | ||
| Post 10 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?