Scanning a school543
Pages:
1
|
AerialMG private msg quote post Address this user | |
| I was asked today to scan a school, a very large school. Just wondering if anybody has scanned a large building and there thoughts on it. Thanks | ||
| Post 1 • IP flag post | ||
|
swpre private msg quote post Address this user | |
| Do it for free. Be respectful of any security requests from the school SWPRE gifts 20% of revenues to nonprofits (before commission payments to realtors). We encourage buyers, sellers and other realtors to match our gift. A $1,000,000 sale can generate from $6K-$36K in gifts. It can add up fast. Introductions and recommendations appreciated. Real Estate Philanthropy FAQs: http://swpre.com/?p=18948 Best always, g George Alexander, MPA Owner Broker, SOUTHWEST PARTNERS | GLOBAL PARTNERS INTERNATIONAL REALTY Chair, REAL ESTATE PHILANTHROPY M +1 713.918.9951 O +1 979.421.9996 Referrals are real estate’s life blood. Our only geographic limits are US State Department based. We appreciate your support. |
||
| Post 2 • IP flag post | ||
|
Jamie private msg quote post Address this user | |
| Yep I've done a few large ones. Only issue will be the overall size. Most likely 20,000+ Sq ft. If you can, measure out the building first. That will let you know if it's possible. Matterport won't stitch multiple scans |
||
| Post 3 • IP flag post | ||
|
|
AerialMG private msg quote post Address this user | |
| How many total scans can you do, 200 or can I contact matterport to do more. Maybe if it's two stories I could do each floor as a separate tour | ||
| Post 4 • IP flag post | ||
|
|
Jamie private msg quote post Address this user | |
| They support up to 200. Usually for this you will have a house around 7500 - 1200 Sq ft (ish) What I would recommend is doing 1 floor and see how many scans you have. At that point duplicate your model and go upstairs. If it starts crashing, you can delete the first floor and keep going. This way you gave a chance of doing both together, but also a backup incase it doesn't work |
||
| Post 5 • IP flag post | ||
|
|
ron0987 private msg quote post Address this user | |
| Just like Jamie said I contacted Matterport on one of there referrals, 200,000 square foot. They confirmed the cap was 200 scans, no square footage, but they would definitely NOT stitch models together. My suggestion is if you can break down your school to under 200 per floor and keep your models broke down like that you should be fine. If it does not have multiple floors break your scans down to where the individual models work independent of each other and logically represent the school. In some cases easier said then done. Ron |
||
| Post 6 • IP flag post | ||
|
jessetutt private msg quote post Address this user | |
| Here is one I did. I did just the main areas and it worked out just fine. http://www.3dscanexperts.com/virtual-tour/st-francis-of-assisi-middle-school-3d-virtual-tour/ Jesse |
||
| Post 7 • IP flag post | ||
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @AerialMG I have created Matterport 3D Showcase tours at many schools, including these at Kennesaw State University near Atlanta. I am comfortable shooting up to 20,000 sf in one model. Beyond that, I manage clients' expectations that Matterport supports up to 10,000 sf. I typically shoot 400+ scans; duplicate the model and then delete scans until I am under 200 scans. For 200,000 sf, I believe it would be doable within Matterport VR (only) by capturing a single path (ala Google Street View) without regarding to dollhouse/floor plan view. For a 40,000 sf construction project, we delivered it as two models. Good luck and let us know what you decide and how it turns out. Best, Dan |
||
| Post 8 • IP flag post | ||
|
|
Jamie private msg quote post Address this user | |
| @DanSmigrod For the larger jobs are you using a 1st or 2nd Gen camera? Also ipad air, ipad mini? What's the combination? |
||
| Post 9 • IP flag post | ||
|
WGAN Forum Founder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| @Jamie Today, we use a second generation camera with an iPad Air 2. I shot the KSU models with a first generation camera and iPad Air 1 (and an early version of the Capture app). It is so much easier, faster and reliable today. Best, Dan |
||
| Post 10 • IP flag post | ||
|
|
Jamie private msg quote post Address this user | |
| @DanSmigrod I found the same thing 1st gen ipad air had lots of issues on a 20,000 2nd Gen newer ipad mini had no problems MP said there is no difference between 1st and 2nd Gen. Hmm |
||
| Post 11 • IP flag post | ||
 WGAN Fan Club Member Boise, Idaho |
360Idaho private msg quote post Address this user | |
| Hey Jamie, When your doing large open areas how far apart can each scan be? Looks like they're much further apart then in residential homes. ~Ken |
||
| Post 12 • IP flag post | ||
|
Marcel private msg quote post Address this user | |
| @kenjblair you shouldn't do larger than 5m apart. Also remember that you cannot scan in the middle of large empty space (20x20m). The camera needs some kind of vertical reference point else it gets confused and doesn't know where the scan is in relation to other scans. | ||
| Post 13 • IP flag post | ||
|
|
AerialMG private msg quote post Address this user | |
| so i tried scanning the school the other night and had all sorts of problems, I was using a ipad mini 2 and about 70 scans in the ipad started to crash on every scan. So i got a ipad air and the same thing was happening. I was able to get a hold of customer support, but had no success in the end. I ended up doing 5 different models. This is the first model when it started crashing https://my.matterport.com/show/?m=9uCBmHFG1dZ Please if anybody else has had this problem let me know, i have another school to do this weekend and would like to do it in just two models. p.s. Did this on Saturday night and matterport customer support was awesome |
||
| Post 14 • IP flag post | ||
|
|
Marcel private msg quote post Address this user | |
| Used to have this problem with the older version of the capture app. I assume you fully updated? | ||
| Post 15 • IP flag post | ||
|
|
AerialMG private msg quote post Address this user | |
| at the time the ios was at 8.3 and the app was the lastest version | ||
| Post 16 • IP flag post | ||
 StandardMember Medford, OR |
KevinD private msg quote post Address this user | |
| @jessetutt Did you use the method that Dan suggests where you over-scan to build the model and then delete scans to get below 200 total? | ||
| Post 17 • IP flag post | ||
|
Andrew private msg quote post Address this user | |
| @jessytutt iPad mini and iPad Air - same gadjet, only screen diagonal is different. Try to use iPad Air2. Had the same problem. Air2 fixed it. https://www.wegetaroundnetwork.com/topic/517/scan-problem-2500sqm/ | ||
| Post 18 • IP flag post | ||
|
|
AerialMG private msg quote post Address this user | |
| I am buying a Ipad air 2 today and am going to give it a shot, KevinD never got over 70 scans before it started crashing | ||
| Post 19 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?