Helping You Connect the Dots to Succeed Faster
WGAN-TV: Now Playing
WGAN-TV: Now Playing
Free WGAN Map
Locations of Matterport Pro3 Camera Service Providers and see the number of Matterport Pro3s and/or BLK360s for each Matterport Pro.
View WGAN Map
Contact Info
Locations of Matterport Pro3 Camera Service Providers and see name, company, website, email and mobile phone for each Matterport Pro.
Join WGAN Sponsor
Get on the Map | A Service of We Get Around Network (not affiliated with Matterport)
One Order  |  One Quote  |  One Contact
Book Multiple GLOBAL Commercial Locations
  • ✔  As-Builts
  • ✔  Construction Progress
  • ✔  Facilities Management
Last 24 Hours: 132 Unique Visitors
9,239 WGAN Members in 149 Countries
Last 30 Days: 28,775 Page Views | 12,272 Unique Visitors | 28 New Members
We Get Around Network Forum
Quick Start | WGAN Forum
Urgent

Urgent help needed [8:45 pm Tokyo Time)4503

Belfast, United Kingdom
3dshowcaseuk private msg quote post Address this user
I am onsite and my capture app is crashing while aligning

I have rebooted both devices several times and tried scanning in a different area

Same problem

I am thinking of reinstalling the capture app, am I correct in thinking that all my previous scans will remain on the iPad if I delete the capture app and then re download and re install

Thanks
Post 1 IP   flag post
WGAN Forum
Founder &
WGAN-TV Podcast
Host
Atlanta, Georgia
DanSmigrod private msg quote post Address this user
@3dshowcaseuk

I believe the answer is yes. If you delete the app, your data goes poof.

Is it possible that the camera "sees" sunlight? If you are outdoors on a cloudy day, clouds do not block the sun.

Can you try scanning closer to the previous scan?

Can you post a few pictures of your the space you are trying to scan in?

Dan
Post 2 IP   flag post
Belfast, United Kingdom
3dshowcaseuk private msg quote post Address this user
Ok so I just created a new model left the camera exactly where it was and scanned as if it was the first scan of the day and voila it didn't crash

I have tried duplicating the model and it still crashes, I have deleted 8 scans back and tried and still crashes

It's as if the model is corrupt

Any iddas
Post 3 IP   flag post
Viewing private msg quote post Address this user
@3dshowcaseuk I had the same problem. Try taking a 360 view and then scan again and see what happens.
Post 4 IP   flag post
WGAN Forum
Founder &
WGAN-TV Podcast
Host
Atlanta, Georgia
DanSmigrod private msg quote post Address this user
Can you start over?
Post 5 IP   flag post
JonJ private msg quote post Address this user
Try opening a new model and start scanning again, in an area where you were able to successfully scan previously, to see if you have the same issues during alignment. This will help you determine it is the app or if it is the particular area you are scanning that is the problem.
Post 6 IP   flag post
WGAN Forum
Founder &
WGAN-TV Podcast
Host
Atlanta, Georgia
DanSmigrod private msg quote post Address this user
Can you post the mini-map (screen capture) and photos of your environment?
Post 7 IP   flag post
Belfast, United Kingdom
3dshowcaseuk private msg quote post Address this user
I was going to avoid starting over
Post 8 IP   flag post
WGAN Forum
Founder &
WGAN-TV Podcast
Host
Atlanta, Georgia
DanSmigrod private msg quote post Address this user
Are you using a level on every scan? I wonder if your first scan was not level. For example, one of the tripod legs was not fully extended and you did not use a level and did not catch that.
Post 9 IP   flag post
Standard
Member
Wandsworth U.K.
RobinLycka private msg quote post Address this user
Try using the preview scan feature and see if you can spot any obvious issues, not sure if you´d see if the camera is level or not.

If you see any strange issues, delete the scan.

Also, might sound silly, but maybe check the storage. It seems that technical issues are more prone to happen as the ipad starts filling up (knowing that you´ve done some pretty large scans).
Post 10 IP   flag post
Belfast, United Kingdom
3dshowcaseuk private msg quote post Address this user
Have a look

https://drive.google.com/open?id=0B9icmzPZ2alNampsZjhZZzR6Vlk
Post 11 IP   flag post
GarySnyder private msg quote post Address this user
Robin is right on some older iPads when you reach the 175 mark you start getting crashes. Were you shooting near a window or mirror that could see sunlight the camera will sometimes keep shooting then just fail to align any more. I've even had it keep chugging along only to find that the scans are all over the place due to unforeseen sunlight bouncing off the floor or other surface like a wall.

You should not have to start completely all over you just need to find the offending scans. One other issue that has bit me in the tush some time is the wondering scan. Check your mini map to make sure that your last scan is where it's suppose to be as you may find it has a mind of it's own and located it self some where entirely different. if that was the case you will get continues alignment errors till you remove the scan and shoot the shot over.

Please let us know how you made out and good luck.
Post 12 IP   flag post
Belfast, United Kingdom
3dshowcaseuk private msg quote post Address this user
Ok folks

Thanks for your help

I just delete the second floor as I had only done 10-15 scans and I started again at the top of the stairs and it is aligning again

Thanks for all
Your input
Post 13 IP   flag post
WGAN Forum
Founder &
WGAN-TV Podcast
Host
Atlanta, Georgia
DanSmigrod private msg quote post Address this user
@3dshowcaseuk

Great solution.

Best

Dan
Post 14 IP   flag post
Belfast, United Kingdom
3dshowcaseuk private msg quote post Address this user
Absolutely flying along now without any further issues worth noting everyone in case it may happen to one of you

Thanks again
Post 15 IP   flag post
MP2FP
Floor Plans
Bangkok THA
mp2fp private msg quote post Address this user
Great - good luck with the rest of the scan
Post 16 IP   flag post
104058 16 16
This topic is archived. Start new topic?