Floorplan missing floor2047
Pages:
1
Portland, Oregon |
Jake private msg quote post Address this user | |
| I just finished a TINY home (less than 800 sq ft) that somebody built in their backyard to rent out. It's got a small footprint but it's 3 levels. The dollhouse and walk-through look great, but the floor plan is merging the 2nd and 3rd floors. Any ideas? https://my.matterport.com/show/?m=z3th9X5LHxn |
||
| Post 1 • IP flag post | ||
|
GarySnyder private msg quote post Address this user | |
| I looks like the last 3 scans you did you did start as floor 3 you just continued to scan with capture thinking you were still on floor 2 You might be able to go into workshop and create a 3rd flooe and then move these scan to floor 3 |
||
| Post 2 • IP flag post | ||
|
Portland, Oregon |
Jake private msg quote post Address this user | |
| No, I added a new floor before adding those at the top. On the iPad I can switch between all 3 floors correctly -- but I can't in the workshop or public view. | ||
| Post 3 • IP flag post | ||
|
|
GarySnyder private msg quote post Address this user | |
| Interesting, perhaps due to the small floor area of the 3rd floor. Ask support for their feedback and let us know what they come back with. | ||
| Post 4 • IP flag post | ||
|
ron0987 private msg quote post Address this user | |
| Jake, I have had this same issue before and the problem I had was my trim lines were not applied correctly and the software merged part of one floor into another. You might check and make sure they are all in place and as tight to the wall as possible so the software is not trying to merge the floors. Ron |
||
| Post 5 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?