Car scan with Matterport Axis?18041
Pages:
1
|
sebad90 private msg quote post Address this user | |
| Hello I'm beginner in Matterport so please be understanding  I've made a scan of the black car and I'm not really satisfied with the results. Here's the link: Scan was made with Samsung S21 and MP Axis. Some questions: 1. Scans are missaligned. Should I make more scans around the car than I did? I made 16 scans around and maybe that's the reason of missalignment. 2. I'm thinking about buying Matterport Pro 3 camera. Would it handle such scan better than phone? Of course I'm not talking about image quality right now (which I assume will be better in Pro 3 than in phone) but about missalignments. 3. What's the best way to scan interior of the car as well and avoid missalignments? Should I place the camera near the car door and take 2 scans (one with door open and one with closed) and then scan inside? 4. Is Matterport service the best for this purpose? Maybe you can recommend some better solution. I don't want to scan the whole showroom but only one car separated in some room. Best regards |
||
| Post 1 • IP flag post | ||
 WGAN FanCLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| The Matterport Axis really wasn't meant for commercial work in my opinion ~ The supported 360 cameras would provide an improvement and a Matterport Pro1, 2, or 3 would provide the best result. The Matterport Pro cameras can also struggle with alignment in tight spaces such as a car interior so, mixing something like a Ricoh Theta Z1 or X for the interior and a Pro camera for the exterior may provide the best result | ||
| Post 2 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| I believe I did this with the Ricoh Theta V back in May of 2019 during the beta testing of the the 360 cameras |
||
| Post 3 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| For the little automotive I do I simply do a simple 360 tour https://www.capturenwlive.com/tours/UQC2uK4Jp |
||
| Post 4 • IP flag post | ||
|
|
sebad90 private msg quote post Address this user | |
Quote:Originally Posted by lilnitsch Sure I know that Axis is not recommended for commercial work. I think that the main problem is stiching between scans. Check my link and go around the car. Some spots are placed by Matterport not in the right place and I cannot fix it by realigning scan. I wonder if Matterport Pro 3 would do it better and without such problems. Another problem for me is to get a smooth transition between outside and inside scan - as I mentioned in question number 3. Your scan is fine but is only inside the car. |
||
| Post 5 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| @sebad90 I am guessing that you may have encountered or experienced miss aligned scans when capturing the exterior of the the vehicle & that this is where your twisting and miss alignment is coming from. When encountering a miss aligned scan it is best to delete the scan position move closer to the last successful scan and scan again. | ||
| Post 6 • IP flag post | ||
 WGAN ForumFounder & WGAN-TV Podcast Host Atlanta, Georgia |
DanSmigrod private msg quote post Address this user | |
| Complete 360 car photography under 4 minutes | Video courtesy of Glo3D.com YouTue Channel | 30 January 2022 @sebad90 Is this video (above) helpful? Dan |
||
| Post 7 • IP flag post | ||
|
|
sebad90 private msg quote post Address this user | |
Quote:Originally Posted by DanSmigrod I know that solution but it's not what I am exactly looking for. But thank you for your response. |
||
| Post 8 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?