Help Please: Holes in the terrace floor in my Matterport Tour15030
Pages:
1
|
ImperialProperties private msg quote post Address this user | |
| Hi all, take a look at my latest house, https://my.matterport.com/show/?m=KUNG3QGV7et&cloudEdit=1&sr=-1.23,-1.4&ss=107 if you move around on the upper terrace facing the pool, you will fall through various holes in the map to the terrace below, also, these gaps can be seen in the 3d model. Any idea, also, I have a lot of spray from the surrounding trees, I have trimmed fairly aggressively and wide on all floors. Cheers Mark |
||
| Post 1 • IP flag post | ||
 WGAN FanClub Member Queensland, Australia |
Wingman private msg quote post Address this user | |
| You have big holes without any 3D data on the balcony and when you just click forward Matterport will send you to the nearest point of scanning. The closest one is one floor down so you are not really falling you are just sent there through a hole without any mesh. If you look carefully even circles from the bottom floor are smaller because they are kind of far away. What you see in a tour is visual data from 360 photo they cover holes so it looks like there is nothing wrong. Press 0 while standing there and you will see the problem. I cannot see any way to fix it apart from coming back 30 minutes before sunrise and redoing the whole balcony. During civil twilight time you can scan outdoor the same way you do iit indoor. |
||
| Post 2 • IP flag post | ||
|
|
ImperialProperties private msg quote post Address this user | |
| Okay great thanks, will do, so with terraces like this, is the suggestion to scan the whole area as if it is a full room, is that right? | ||
| Post 3 • IP flag post | ||
|
|
ImperialProperties private msg quote post Address this user | |
| all good now, went back and scanned many more points on the terrace, now the holes are filled! Thanks Still got some annoying spray though from the surrounding trees, will rework the trimming when I have a mo. cheers all. |
||
| Post 4 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?