Scanning Matterport - 15K SF with Ricoh Theta Z113633
Pages:
1
|
Atriux private msg quote post Address this user | |
| Hi Guys, I've landed to a bigger project than i usually do. The project is a warehouse ( partial occupied ) with a total space (aprox ): 15K SF with 20FT ceiling ( and 2 huge doors).MY monopod goes up to 5.5FT. Was wondering if i have any issues doing an MP model with Ricoh Theta Z1 in this case? Any feedback is appreciated. Thank You |
||
| Post 1 • IP flag post | ||
|
kmiller01 private msg quote post Address this user | |
| I would only use MP Pro2 with a BLK. | ||
| Post 2 • IP flag post | ||
 WGAN FanCLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| It is plausible. This space was a little larger than that. This wasn't a paid gig this just happened to be the last convention I was able to attend before things got shut down. There are a couple minor misalignments in this model. When shooting with a 360 camera the best advise I could offer is to over shoot shoot more scan positions closer together when in doubt. Should you see any miss-placed scan positions delete them immediately and move closer to the last successful scan position |
||
| Post 3 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| I shoot all my paid gigs with a Pro2 | ||
| Post 4 • IP flag post | ||
|
|
Atriux private msg quote post Address this user | |
| @lilnitsch Yes many pictures when in doubt... I use a IP XS worked ok so far under 5K SF (I ordered the damn iPad pro but still arriving from last week) . Thks |
||
| Post 5 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| @Atriux A battery bank would also be recommended ~ a riser will give you access to the USB C port while shooting the usb cable can be ran down the monopod and you can attach the battery with tape, velcro, or whatever is handy.  |
||
| Post 6 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| @Atriux You'll find marking up Matterport Models on the iPad a lot less tedious then trying to mark them up on an iPhone screen |
||
| Post 7 • IP flag post | ||
 WGAN StandardMember Las Vegas |
VTLV private msg quote post Address this user | |
| I've been using Matterport cameras on everything. This week, I had a time crunch and went Theta Z1 on a mansion with an indoor basketball court (18K sq ft / Ipad Pro). Windy weather and shorter days weren't helping with timing. I was shocked to see the Z1 on Matterport use less battery than Zillow tours and only using one portable battery power bank for the day. I think you can pull it off as long as the warehouse isn't full of traffic. Watch your ipad constantly in case of a misalignment error. Don't get greedy with distanced shots. If you get a misalignment message saying to scan closer. Delete the shot, bring it in and shoot again. |
||
| Post 8 • IP flag post | ||
|
imagine3d private msg quote post Address this user | |
| @lilnitsch nice job on your matterTAGS | ||
| Post 9 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| @imagine3d Met a lot a good contacts this was the last Inman Connect in Las Vegas before things got shut down due to COVID |
||
| Post 10 • IP flag post | ||
|
|
imagine3d private msg quote post Address this user | |
| @lilnitsch are you busier now than pre covid? | ||
| Post 11 • IP flag post | ||
|
WGAN Fan CLUB Member Coeur d'Alene, Idaho |
lilnitsch private msg quote post Address this user | |
| @imagine3d I’d say a bit busier |
||
| Post 12 • IP flag post | ||
|
|
Atriux private msg quote post Address this user | |
| @lilnitsch Yes with the iPad Pro  Looks like the job got postponed after TG weekend and iPad will arrive before . I use this setup Bushman V2 & Halo 360 ( can play as battery & light) :  |
||
| Post 13 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?