Helping You Connect the Dots to Succeed Faster
WGAN-TV: Now Playing
WGAN-TV: Now Playing
Free WGAN Map
Locations of Matterport Pro3 Camera Service Providers and see the number of Matterport Pro3s and/or BLK360s for each Matterport Pro.
View WGAN Map
Contact Info
Locations of Matterport Pro3 Camera Service Providers and see name, company, website, email and mobile phone for each Matterport Pro.
Join WGAN Sponsor
Get on the Map | A Service of We Get Around Network (not affiliated with Matterport)
One Order  |  One Quote  |  One Contact
Book Multiple GLOBAL Commercial Locations
  • ✔  As-Builts
  • ✔  Construction Progress
  • ✔  Facilities Management
Last 24 Hours: 192 Unique Visitors
9,268 WGAN Members in 149 Countries
Last 30 Days: 21,103 Page Views | 11,155 Unique Visitors | 27 New Members
We Get Around Network Forum
Quick Start | WGAN Forum
AdviceTips

Has anyone ever shot this?...1313

Cabrahams private msg quote post Address this user
It's a ladder to a loft space. Just wondering how to go about doing this? Tie the camera on the tripod to the ladder?


Post 1 IP   flag post
Jamie private msg quote post Address this user
Try and shoot on the ground level a bit away from the ladder and extend the tripod high. Go to the top of the ladder and drop the tripod as low as possible.
Post 2 IP   flag post
WGAN Forum
Founder &
WGAN-TV Podcast
Host
Atlanta, Georgia
DanSmigrod private msg quote post Address this user
@Cabrahams

1. Place the camera on a table
2. Hide scan in workshop
3. Fly from top to bottom: no need to 'walk' up the ladder

Or, buy an extra tall tripod for the mid-height scans

Dan
Post 3 IP   flag post
ron0987 private msg quote post Address this user
Jamie and Dan give excellent examples, we had a similar job and we over scanned the lower area. Then we moved the camera as high as the tripod would take it next to the ladder, then moved it to as low as it would go on the second level. Just remember do not scan in the same place next to the ladder or you will not be able to move thru the model from the lower level to the upper level. You will end up with the model with no way to move thru the model. We left the scan on the same level on the capture app. It worked fine for us.

Ron
Post 4 IP   flag post
AerialMG private msg quote post Address this user
so i just did a shoot with lofts, and was successful.. i did some on floor 1 and a couple with switching to floor two, worked both ways but was easier just leaving it on floor one. I put the camera as close to the ladder as possible and extended the tripod as high as i could go (scanned) then moved the camera to the loft area as close to the ladder as possible and lowered it to the lowest setting on the tripod (scanned) Worked !!

https://my.matterport.com/show/?m=y3yepNWBoZc
Post 5 IP   flag post
Jamie private msg quote post Address this user
Well done. Looks great
Post 6 IP   flag post
104395 6 6
This topic is archived. Start new topic?