My first Matterport 3D Tour: Feedback Please (used Z1 and V to compare)12586
Pages:
1
|
FabioLuna private msg quote post Address this user | |
| Hi everyone, Please critique my first Matterport scans. I had ordered a Theta V while I was waiting on a Z1 and was lucky enough to get both last week. Yesterday, I scanned this beach front condo in Baja. These are my first scans and I know they are not that great, so feedback is greatly appreciated... thanks! Taken with Theta Z1 Taken with Theta V |
||
| Post 1 • IP flag post | ||
|
MarcelloM private msg quote post Address this user | |
| Z1 is another (better) world! | ||
| Post 2 • IP flag post | ||
 WGANStandard Member Los Angeles |
Home3D private msg quote post Address this user | |
| Z1 space is certainly superior. Your "V" space exhibits a large mesh obstruction moving between the balcony and inside. Z1 space is clean there. | ||
| Post 3 • IP flag post | ||
|
|
castaway private msg quote post Address this user | |
| Your scans look great. This is minor but my kooky take is to consider weighing the thrill of hiding the camera in front of mirrors, against the possible cost to the feeling of not being able to stand in front of a sink for instance, for the viewer. Not a popular view, but fwiw. More importantly, about the mesh that got built on the Theta V scan's threshold to the balcony transition - to be clearer on the A-B? Sun was less, shadows were far longer on the Z1 scan. So part of it could have been partially a time of day/lighting/glare/reflections' effect on the photogrammetry, but if you don't mind sharing? Were there any scans on the Theta V model that were hidden after upload? Maybe ones (even a single one) that saw the glass door as closed, even from all the way at the other side of the unit, before being hidden? If there were no hidden scans (not even one) that the glass door as closed (partially nor fully) then this could be helpful, for best practices with all 360 cams, in terms of needing to be conscious of the light/glare/reflections situation, even though no infrared send/receive pairs (as with the Pro and Pro2) are in play. Very tight scanning! |
||
| Post 4 • IP flag post | ||
 WGAN FanClub Member Buffalo, New York |
GETMYVR private msg quote post Address this user | |
| Just me? but Matterport has been sending my tours back slightly off, where I've needed to straighten the verticals, and on a keyboard I use the arrows to navigate so then everything is balanced. Saw that this one was also off a bit too (? or is it), and I'm wondering if Matterport might be burning through these renders too fast with loose QC? My thought on your 1st - nice job, but go much lower in the kitchen (just above the sink and range) & bathrom too (about waist high just above the vanity), that way when you take your images of those rooms and spaces, you won't have to look down and have a kiltered image. You'll have nice straight vertical lines. |
||
| Post 5 • IP flag post | ||
|
|
ron0987 private msg quote post Address this user | |
| Great job and again just personal preference I have to agree with @GETMYVR I would place camera height just a little bit lower. Z1 definitely better. | ||
| Post 6 • IP flag post | ||
|
|
FabioLuna private msg quote post Address this user | |
| thanks everyone for the feedback. I had the cameras at about 5 1/2 ft,I will definitely try using different heights depending on how tall the total space is. @castaway I have no idea how that mesh got created, I don't remember deleting any scan points and I didn't touch any of the windows. I was going to use the Z1 first and take advantage of the light, but the battery had drained because I forgot to turn off the camera after charging( Duh!!)...I used the V5 first then I did some regular DSLR shots, then scaned with the Z, so yes the sun was further down on the horizon ( it was about 3 hours before sunset)all in all I guess it was not bad for my first scan, hope to get better on my second one. @GETMYVR I didn't think of moving the height of the camera during a scan, in my mind I thought that would introduce some type of artifacts, I will try doing that next time. |
||
| Post 7 • IP flag post | ||
Pages:
1This topic is archived. Start new topic?